Plastic Plates Rope Mine Hoist
|FOB Price:||US $5-200 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $5-200/ Piece|
|Transport Package:||Sea Worthy Packing or as Required|
|Payment Terms:||L/C, T/T|
- Material: Plastic
- Water Absorption: 0.2%~0.4%
- Origin: China
- Kind: Engineering Plastic Sheet
- Trademark: CIC
China Industry Luoyang Engineering Plastic Co., LTD (CIPC) , named previously as Engineering Plastic Factory of CITIC Heavy Machinery Industry and Commerce Co., LTD, which controlled by CIC Luoyang Heavy Machinery Co., LTD and has established on Jan. 12th, 2010 with 16,000 thousand RMB registered capital. With CIPC establishment, all the sales businesses, qualifications and intangible assets of Engineering Plastic Factory of CITIC Heavy Machinery Industry and Commerce Co., LTD have been owned and undertaken by CIPC. CIPC has specialized in research, development and production of engineering plastics, and the teaching and science research base of mining friction material of China Mining University, production-teaching-research base of Henan Science and Technology University, and CIPC is one of members of China Heavy machinery Industry Association (CHMIA).
CIPC is the first company to produce high performance friction liners. Our products can be found almost in all Chinese Mines by equipped in the hoists of CITIC Heavy Machinery Co., LTD, being supplied to Shanghai Metallurgical Mining Machinery Factory, Sichuan Mining Machinery Group Co., LTD, Rieter Hunan Coal Mining Equipment Co., LTD, Chongqing Taifeng Mining Machinery Co. LTD, Jinzhou Mining Machinery Group Co., LTD, Guiyang Gaoyuan Ming Machinery Co., LTD, etc., and occupied 90% of all domestic and international markets.
With the technological improvement of hoist, higher requirements on its auxiliary components become more and more. Our Products servicing in mining feedback us much information which promote us to adjust our product structure and develop new products by our high level r&d team and the national first-class testing equipments. At present, more diversified product structure and more satisfactory performance must bring our CIPC shining brightly all over the word.
1. Of high mechanical strength, and long usage cycle
The compressive strength of this kind of plastics plates is 7 to 10 times higher than that of the wood liner, thus conditions such as crushing and flatting of the wire rope groove, and its usage cycle is above 5 times longer than that of the wood liner.
2. Of wide range of application
The plastic plates are of good resistance of desiccation and moisture, avoiding the phenomenon of the sun cracking and rotting of the wood. They are especially suitable for using in severe environment, such as Mining of large water spray and high corrosivity, and underground mining.
3. Of light proportion and no water absorption
The proportion is 0.98, which is lighter than the wood liner after absorption, thus the rotational inertia and the reactive power of the equipment would not be increased.
4. Compression moulding, with flat surface of the rope groove
They are easy to install. With the neatly rank of the wire rope, phenomenon such as locking and skipping of the wire rope could be avoid from happening, and the usage life of the wire rope could be extended.
|Ware Rate (10-7cm3/Kgm)||1.0||3 times higher than that of the timber|
|Degree of Corrosion (g/m2)||≥±2||7times higher than that of the timber|
|Hardness (Shore D)||70~84|
|Martin Heat Resistance (ºC)||0~65|
|Density (g/cm3)||0.97~0.99||Generally density of the wood is 0.85|
|Impact Strength (kg.cm/cm2)||7.1~9.5|
|Compressive Strength (Mpa)||68.5||Wood horizontal grain bearing stress is 0.85|
|Bending Strength (Mpa)||61.5||Bending strength of wood is 6|
|Water Absorption (%)||0.01|
numerical control center large injection molding machine